How Fuel Ionizers Work?

Fuel ionizer is one of the simple magnet ionizer gadgets which was newly introduced into the market after a big scientific research on the improvement of the fuel efficiency and increase the efficiency of the engine with a simple installation process.

Fuel ionizers are the energy tubes which are made of aluminium and steel case. Scientifically we can say that the fuel consumption in the internal consumption which is based on the concept that converts the 30-35% of the neutral ions within the petroleum fuel. Ionizers make the ions recharge the neutral molecules produces the charged ion pairs and make them as a useful energy and these become the stable energy source. This type of ionization process can be implemented in some of the unstable energy source which are being used are all types of gasoline products, diesel, LPG [Liquid Petroleum Gas] and some of the oil which are used in the furnaces.

Fuel ionizers basically work on the internal combustion engines which help in power up the diesel engines. It’s a clean fuel for the engines and injectors which in turn reduces the emission of harmful gases and gives a better mileage with an easy start to the vehicle. These are used in the modern and heavy duty trucks. The complete unit of the ionizer is installed at the side of the fuel tank of the vehicle of the internal combustion engine between the fuel pump and the carburettor. The ionization of the fuel does not take instantly but on the running conditions. You can observe the different in performance of the engine and other mechanical equipment like liberating more power by complete combustion of the fuel, clean engines and fuel injectors, reduces the carbon emissions, better mileage, reducing the fuel consumption with less shifting of the gears while caring a heavy loads.         

Fuel ionizer places two heat resistant Neodymium magnets which are placed around the fuel line to ionize the fuel before entering into the combustion chamber. For some ionizers are made with magnets which decompose the gasoline molecules into ultra-particles. The purpose and working principle of a car fuel ionizer as air purifiers. Fuel ionizer are of two different types one for the smaller automotive and other for the trucks, diesel engines. Electronic engine ionizer fuel saver consists of a few pieces of wire moulded with a rubber blocks called as capacitor blocks and these rubber clips are plugged to the electrode and a charge partial breakdown in larger hydro carbons molecules which are non-fired in cylinders results in complete combustion of the fuel. The improvement of the fuel is made by a rich air/fuel gas mixture is formed with complete combustion of the fuel by throttling process consequently produces the fuel efficiency, torque.

Using these types of the ionizers we can save the fuel in a range of 20-25% and increases the efficiency and life of the engine. Installing this complete setup require a short period of time just 2 to 3 minutes. The cost of the equipment is very cheap and the cost of each piece will be in a range of $3-$5 only.

"With this we can support the green eco-friendly life"